2.250" Archives – Profile Technology https://profiletech.com/bore/2-250/ Rethink - Retool - Relaunch Wed, 30 Dec 2020 22:58:20 +0000 en hourly 1 https://profiletech.com/wp-content/uploads/2016/02/map_icon.png 2.250" Archives – Profile Technology https://profiletech.com/bore/2-250/ 32 32 Cinch Collars https://profiletech.com/product/cinch-collar/ Wed, 09 Dec 2020 19:49:33 +0000 https://profiletech.com.s181547.gridserver.com/?post_type=product&p=462 5" Diameter x 1" Wide with a Keyway and Bore to match your specific application, these Cinch Collars can keep your Indexable heads from translating left and right on on your smooth shaft. The three set screws are used for tightening the rest of the assembly and taking any slop out of the plates. To move the entire assembly along the shaft simply loosen two bolts and the head and collars will slide.

The post Cinch Collars appeared first on Profile Technology.

]]> The post Cinch Collars appeared first on Profile Technology.

]]> IBNC – Insert Dado Groover https://profiletech.com/product/ibnc-insert-dado-groover/ Wed, 09 Dec 2020 19:47:39 +0000 https://profiletech.com/?post_type=product&p=1580 Insert Dado heads in various widths for making drayage lumber products for banding grooves in 2x2, 3x3, 4x4, and other common widths. Common banding groove widths are 9/16", 3/4", 7/8" and 1", 1-1/4", 1-3/8", and 1-1/2"

The post IBNC – Insert Dado Groover appeared first on Profile Technology.

]]> The post IBNC – Insert Dado Groover appeared first on Profile Technology.

]]> IHS – Insert Hogger Saw https://profiletech.com/product/ihs-insert-hogger-saw/ Wed, 09 Dec 2020 19:46:22 +0000 https://profiletech.com/?post_type=product&p=1579 Insert hogger saws and hogger stacks are used for trimming ofal / excess lumber before entering gangsaws, resaws and slab board edges while reducing handling of waste down stream and creating valuable by-product such as sawdust, chips or shavings.

The post IHS – Insert Hogger Saw appeared first on Profile Technology.

]]> The post IHS – Insert Hogger Saw appeared first on Profile Technology.

]]> INH-1.5 Radius Notching Head https://profiletech.com/product/inh-1-5-radius-notching-head/ Wed, 09 Dec 2020 19:44:54 +0000 https://profiletech.com/?post_type=product&p=1578 Insert Head to Make a 2 way stringer pallets into a 4 way entry pallet putting (2) 9" wide notches 1.5" Deep into the stringers base with a larger 1.5" Radius

The post INH-1.5 Radius Notching Head appeared first on Profile Technology.

]]> The post INH-1.5 Radius Notching Head appeared first on Profile Technology.

]]> INH-0.5 Radius Notching Head https://profiletech.com/product/inh-0-5-radius-notching-head/ Wed, 09 Dec 2020 19:43:22 +0000 https://profiletech.com/?post_type=product&p=1576 Insert Head to Make a 2 way stringer pallets into a 4 way entry pallet putting (2) 9'' wide notches 1.5'' Deep into the stringers base

The post INH-0.5 Radius Notching Head appeared first on Profile Technology.

]]> The post INH-0.5 Radius Notching Head appeared first on Profile Technology.

]]> ISH – Insert Shaving Head https://profiletech.com/product/ish-insert-shaving-head/ Wed, 09 Dec 2020 19:42:11 +0000 https://profiletech.com/?post_type=product&p=1575 Shaving Mill heads for creating sawdust or shavings for animal bedding, chips, pellets, carbon filters, fertalizer, biofuel and other wood residuals.

The post ISH – Insert Shaving Head appeared first on Profile Technology.

]]> The post ISH – Insert Shaving Head appeared first on Profile Technology.

]]> IPH – Sizer Planer Head https://profiletech.com/product/iph-sizer-planer-head/ Wed, 09 Dec 2020 19:40:28 +0000 https://profiletech.com/?post_type=product&p=1574 Insert Planer Head - For sizing cants and lumber to final size before entering Resaw or Gangsaw

The post IPH – Sizer Planer Head appeared first on Profile Technology.

]]> The post IPH – Sizer Planer Head appeared first on Profile Technology.

]]>